Форум » » Problem with Search process » Ответить
Problem with Search process
patris: When you do a search procedure for a given Node/Page, the result is negative, says not found, however, the same search performed through the "Quick Search", ends successfully. Why is this happening? Please see screenshot.
Ответов - 40, стр:
1 2 All
Carc: patris пишет: When you do a search procedure for a given Node/Page, the result is negative, says not found, however, the same search performed through the "Quick Search", ends successfully. Why is this happening? Change of Search area option: 1) Check Pages of all types, otherwise search in formatted text pages only. 2) Change text analysis optnms. Uncheck setting "Match Case" and "Whole word" Quick search is very simple tool. 1) Search on entire documents (always) 2) Search on all nodes types (always) 3) Search without option: match case and other (always) 4) Quick on nodes header and\or comments (always) Standard seacrh takes into account all these parameters and in various combinations and consequently depend on this search results. Quick search is quite a different instrument: it is maximally simplified, intended for instant search on a very rough match. Sometimes the user is much easier to go over 2 or 3 sample option quick search, than to understand and looking at the settings advanced search.
patris: OK. I'll try!
patris: Problem remains the same! Every time I enter an item (node/page) to search in the dialog box, then trying to find a second node, the internal Charset has changed and I can not re-enter western characters. The only way to normalize the situation, after the first search, is to close the application and reopen. Needless to say, after each issue, I review the status of Charset and everything appears normal and OK Please, can you check on the program this difficulty? A second problem is with the search method "Standard", I tried all possible ways and the example given in yesterday, not working, can not find the existing node. It seems that to find a bar within the text, the system " is lost" (20091019 / text), because leaving only the date is found immediately.
Carc: patris пишет: Problem remains the same! Every time I enter an item (node/page) to search in the dialog box, then trying to find a second node, the internal Charset has changed and I can not re-enter western characters. The only way to normalize the situation, after the first search, is to close the application and reopen. Needless to say, after each issue, I review the status of Charset and everything appears normal and OK Please, more detail! As you change the font in the tree and what menu commands, and then step by step, about the search, and at what point is changing the font, and more importantly when you notice that? patris пишет: A second problem is with the search method "Standard", I tried all possible ways and the example given in yesterday, not working, can not find the existing node. It seems that to find a bar within the text, the system " is lost" (20091019 / text), because leaving only the date is found immediately. 1) What is the method of searching for "Standard"? Wow! This is something new in this program, it seems the code began to mutate:) 2) Please send me by e-mail a document which does not search. Indicate that it is not, and in which node is the de facto search text.
patris: quote: A second problem is with the search method "Standard", I tried all possible ways and the example given in yesterday, not working, can not find the existing node. It seems that to find a bar within the text, the system " is lost" (20091019 / text), because leaving only the date is found immediately. 1) What is the method of searching for "Standard"? Wow! This is something new in this program, it seems the code began to mutate:) You yourself referred to the topic by saying: Standard seacrh takes into account all these parameters and in various combinations and consequently depend on this search results. Please, see your own comment to replicate my problem report (18.11.09 02:37) more detail!
Carc: Heh, and what next? See to Your search parameters - nodes types, word analyz and etc...
patris: What I expect from you (as user Aml Pages) is to analyze and solve the problems with the Charset in the Search, Why auto-change the Charset?
Carc: patris пишет: What I expect from you (as user Aml Pages) is to analyze and solve the problems with the Charset in the Search, Why auto-change the Charset? You try to change of font from options? this I asked the day before yesterday...
patris: You try to change of font from options? this I asked the day before yesterday... I'm confused ... Why change the font? if the problem is in the Charset. In my humble opinion, the problem is in the charset of the Search dialog box, and the problem is checked when entering data for a second search by typing the information into the keyboard, the characters that appear are the Cyrillic charset instead of the Occidental. Why change the charset in the Search dialog window?
Carc: patris пишет: Why change the charset in the Search dialog window? Charset not change selft. Combo box on search dialog use default font from text editor. Please, check font setting for text editor in Tools\Options (tab "Panels\Editor").
patris: Strange!, Very strange: I have made further tests, I even think that was the symbol slash ("/") that to be found to change the charset, however, removes and replaces it with another ("-") and the problem stayed the same. So I removed all the symbols of the names of the nodes and left only the text (normal characters) more numbers (date: 20091122), but the problem is still there, is not solved! I get the impression that Windows is where you change the Charset. (?) Steps performed: 1. Click on Search button 2. In the dialog box, enter the name of the node/page to find 3. Click on FIND 4. First Result: Node found OK 5. Remove dialog box, name of previous node 6. enter name of the new node/page to find (here, by entering the charset has been changed and all typed characters are displayed in Cyrillic.) 7. To normalize the charset, I close the application and start over again.
Carc: 1) Please tell me how you change fonts? 2) Please send me an email file of your settings (menu Tools \ Options, see to dialog menu, Options \ Export to File, and send me the file)
patris: 1) Please tell me how you change fonts?
Carc: 1) OK! This is problem with font in Search dialog only? Tree no has this problems? 2) I make small fix on 9.15 Alpha. If You want, i can send exe-file by email. It's not even a beta version for testing, this Alpha-version, exclusively for private use. But I can say that I myself favor of the alpha version! In the alpha version of the changes took place only a completely new parts, brand new features + small corrections made
patris: 1. Yes!, The problem is only with the Font in Search dialog 2. OK. I prefer to wait for the 9.15 official Alpha version!
Carc: patris пишет: 1. Yes!, The problem is only with the Font in Search dialog Thank You! patris пишет: 2. OK. I prefer to wait for the 9.15 official Alpha version! But you can try to run it without even opening your documents, create a blank document and try to find a corrected. Then you can remove the Alpha-version!!
patris: The already-reported Charset problem also affects the Tree and the TextEditor !!! See image:
Carc: screenshot of too poor quality, do not see any details
patris: Please could tell me, what the parameters are plotted or buttons that have to play to improve the screenshot? I can not translate the buttons or sub-titles of the website to enhance the image.
Carc: patris пишет: Please could tell me, what the parameters are plotted or buttons that have to play to improve the screenshot? I can not translate the buttons or sub-titles of the website to enhance the image. OK! This screnshot is valid! Previous screenshot is very small (i cannot see to font settings)
Carc: You use save options to Windows registry of ini-file (see menu "Tools\Options", tab "Miscellaneous")?
patris: Save as to ini-file Look at:
Carc: Please, send me ini-file by email. (Full ini-pathname see on tooltip in this dialog) or export settings to any file (see menu "Options" on this dialog)
patris: Where can save this file? What is the location of the ini-file in Vista? What is the exact name of the ini-file?
Carc: patris пишет: Where can save this file? What is the location of the ini-file in Vista? What is the exact name of the ini-file? See to options export
patris: OK. I've sent a file called Config.ini size = 6 KB I would appreciate your prompt feedback and advice thanks.
Carc: patris пишет: OK. I've sent a file called Config.ini size = 6 KB I would appreciate your prompt feedback and advice thanks. 1) Where start the AmlPages.exe (flash drive or hard disk, e.g. from "Program Files\Aml Pages")? 2) Try, please change options placement to Windows registry. I have a suspicion that the problem is to configure WIndows Vista. Perhaps it prohibits the maintenance of configuration files in the folder the program. Although previously such problems did not happen. And besides, such as Microsoft promised to support the old interfaces, and all Windows is exactly what happened. That's why I think it makes sense to try variant is a Windows Registry, it is probably a problem in this area. But exactly 100 percent, I can not be guaranteed.
patris: 1) Where start the AmlPages.exe (flash drive or hard disk, e.g. from "Program Files\Aml Pages")? It starts from the hard disk and from "Program Files\ Aml Pages" 2) Try, please change options placement to Windows registry. What is the difference that the configuration is saved in a ini-file or in the Windows Registry? It seems to me that the Windows registry option is more intrusive.
Carc: patris пишет: What is the difference that the configuration is saved in a ini-file or in the Windows Registry? Virtually no difference - except in cases when the Microsoft openly impose their policies on the use of the registry (for example, lists of most recently used documents). In all other cases in 99 out of 100 Aml Pages will automatically determine exactly where to save the settings. But in case you can change settings in Windows, which prohibits entry settings in the ini-file in the program. Moreover, this setting can be exhibited even by default, and certainly this can easily happen in the infamous Windows Vista. The register default is unlikely. It seems to me that the Windows registry option is more intrusive. The program stores all settings in the registry in a particular branch, which has nothing to do with other programs. Furthermore, Microsoft recommends using just Windows Registry (but, Microsoft has repeatedly changed its position on this issue). Well, then, record the settings in the registry should theoretically be faster. To be sure, it would be good that you have sent an ini-file is a program folder. Since in the mechanism of export settings in the ini-file can not operate certain restrictions custom settings for Windows,
patris: it would be good that you have sent an ini-file is a program folder. In generating the ini-file, it automatically was sent to the following folder: C:\Users\P...\AppData\Local\VirtualStore\Program Files\Aml Pages You want the move or copy in the root folder of AmlPages? Ultimately, you want to do: a) move / copy current ini-file to the root folder of AmlPages, or b) Change current option ini-file for Windows registry? please give me clear and precise instructions. Thanks,
Carc: patris пишет: In generating the ini-file, it automatically was sent to the following folder: C:\Users\P...\AppData\Local\VirtualStore\Program Files\Aml Pages You want the move or copy in the root folder of AmlPages? Aml Pages itself has its own configuration file in its folder, next to the executable file AmlPages.exe. Everything else is already the superstructure of Windows, and depends only on itself. That's why I recommended to change the storage settings on the registry Windows - it is the recommendation of most Microsoft. And support for the ini-files made for portable-version, and its use on the hard disk only slow down the program.
patris: So, how come? a) delete the ini-file? b) change to save in the Windows Registry? c) both d) none of the above Please, I am no expert in OS Windows, so give me clear and precise instructions. With all this, what is the final goal?
Carc: patris пишет: b) change to save in the Windows Registry? b) change to save in the Windows Registry!
Carc: I upload new version (exe-file is old, 1975) but NEW help file (with more fixes for link and 2 new cool articles on English about tips and tricks) New version distributiv here: http://www.amlpages.com/Source/amlpages_en.zip Direcltly link to new help file only: http://www.amlpages.com/Source/amlhelp_en.zip
patris: OK
Carc: You liked the new article ( "tips and tricks") from the new help file? Do them useful for your information?
patris: OK. Interestingly, more info. One suggestion: It might be better if the information included screenshots!
Carc: patris пишет: OK. Interestingly, more info. One suggestion: It might be better if the information included screenshots! OK! I'll be remade screenshots to articles!
patris: The last update to version 9.14 build 2075 [2009-Dec-03], no solves none of the reported problem on "Search", the problem remains as before. First search works perfect, then to make the second, I can not specify the name of the node / page for entering characters in the input window, the characters typed are in Cyrillic.
Carc: patris пишет: The last update to version 9.14 build 2075 The binary of AmlPages.exe is not changed! This is the only service rebuild of installer (help file and many small corrections for installation program)
полная версия страницы